How to repair LCD TV Auto Change Channel
Problem
Model : Hisense TLM26V68 LCD TV
Chassis: MST721DU
Symptom: LCD TV
with auto change channel problem
The complaint of this Television was TV channel will automatically change.During initial observation, the television sound and display were
normal. The problem only occurs while watching television programs. First suspect was the remote control or
the push button front panel controls. Removed the remote control batteries the problem still
remains. Disconnected the CN8 connector (control panel pcb board of the tv) still
with the same problem.
Have tried to replace the crystal of main chip, but the problem remain the same. After that,
checked the supply voltage to main chip, 3.3V_MST line was getting 3.7V instead of 3.3 volt. So suspect the U2
3.3V SMD voltage regulator IC have problem. After replaced the U2 IC, the TV was back to
normal!
Conclusion: Even this article a bit short, but it is helpful to us. We know why the lcd tv
can be auto change channel during initial observation
now. This method can apply to other tv like Plasma Tv too.
So you can use this method to troubleshooting lcd or plasma tv mainboard and find out the
culprit!
To your success!
Kent
http://www.LCDRepairGuide.com
http://www.LCD-Television-Repair.com
http://www.Plasma-Television-Repair.com
http://www.Projection-Tv-Repair.com
LCD TV Repair
Membership
V3.0- LED & LCD TV Repair Tips ebook V2.0 - LCD & LED TV Repair Tips ebook
V1.01-Collection of LCD TV Repair Tips
Testing Electronic Components Ebookby Jestine
Yong
SMPS Power Supply Repair Guideby Jestine Yong
To
your success!
Kent
Liew
http://www.LCD-Television-Repair.com
http://www.LCDRepairGuide.com
http://www.Plasma-Television-Repair.com
http://www.Projection-Tv-Repair.com
|